Precision,Kris Gauge Blocks,Guage Blocks(Tungsten Carbide/Steel),Guage Blocks (Tungsten Carbide/Steel),Guage Block Calibrator(Computrized),Long Series Guage Blocks,Length Bars,Caliper Checker,Depth Micro Checker,Internal Micro Checker,Micrometer Checker,Dial Guage Comparator Stand,Dial Snap Gauges,Snap Guage,Carbide Plug Guages,Ring Guages,Width Guage,Carbide Measuring Pins,India

Guage Blocks

Guage Blocks
(Tungsten Carbide/Steel)

Request a quote...

Model

Guage Blocks (Tungsten Carbide/Steel)

• K C Precision offers wide range of guage blocks from Tungsten Carbide and Steel material, covers all grades of Guage Blocks(i.e. Grade 00, Grade K, Grade 0, grade 1 & Grade 2?) as per IS/ISO/DIN/BS Standard's specification in metric and imperial.

• Offers in standard/ Non Standard sizes, manufactures sizez as per customers requirments, also offers individual Guage Blocks.

• Wear Protectors and Guage Blocks required for Calibration of Micrometers are also offered.

• KCP make Guage Blocks are made from special grade of Tungsten Carbide/Alloy Steel for greater wear resistance and to produce superior surface finish.

• Manufactured by specially developed techniques to achieve the excellence in chracteristics required of guage blocks.

• All Guage Blocks are supplied in quality wooden casing along with calibration certificate traceable to National Standards and Instructions manual on the Use and Care of guage Blocks.

Standard Sets offered are:

Type Of Metric Sets	No. Of Guage Blocks	Type of Imperial Sets	No.Of Guage Blocks
M122/1	122 Nos.	E 81	81 Nos.
M112/1	112 Nos.	E 41	41 Nos.
M103/1	103 Nos.	E 36	36 Nos.
M88/1	88 Nos.	E 9	9 Nos.
M47 /1	47 Nos.	E 2	2 Nos.
M46/1	46 Nos.
M32/1	32 Nos.
M 9/1	9 Nos.
M2/1	2 Nos.
M2/1	2Nos.

Model

Guage Block Calibrator(Computrized)

• Riigid and very precise instrument useful for quick & reliable calibration of Guage Blocks from 0.5 to 200 mm as per ISO/DIN/BS standard in Metric/Imperial.

• Best suitable for calibration of all grades of Guage Blocks (i.e Grade 00, Grade K, Grade 0, Grade 1 & Grade 2)

• Measurement with the help of two LVDT probes (Top & Bottom) , contacts both the faces of Guage Block allows differential measurement,which gives most accurate results .

•Specially developed user-friendly software suitable for calibration in Metric & Imperial. Measurment not influenced by manual forces .

• No Zero Setting required,compares the difference in length of Master and Test Guage Blocks, adds arithmetically the deviation of Master Guage Block taking in to account expansion in length due to temperature,diffrence from standard temperature,expansion in length due to difference in material of Master and Test guage Block and Deformation factor.

• Quick results for selection of Grade, Center deviation & Parallelism

• Supplied with calibration certificate traceable to National Standards & Instruction Manual on the use & care of guage block calibrator Also Supplied in Manual version of guage Block Calibrator (Manual Evaluation of Measuring Values) .

Technical Specification:

Measuring Range	0.5-200 mm
Work Table	60 x 60 mm(Tungsten Carbide)
Measuring Inconsistency	±0.02µ
Locating bore for LVDT probe	8 mm
Weight	45 kg

Guage Block Calibrator(Computrized)

Request a quote...

Long Series Guage Blocks

Request a quote...

Model

Long Series Guage Blocks

• Offered from range 100 mm to 500 mm in Grade K, Grade 0, Grade 1 & Grade 2as per ISO 3650/DIN 861 standard.

• Offered in standards sets as well as individual Standard/ Non standard size.

•Manufactured from special grade of Alloy Steel for greater wear resistance and to produce superior surface finish.

• Holes are provided to both ends of Guages Blocks for combinations with the help of Guage Block Clamp.

• All Guage Blocks are supplied in quality wooden casing along with calibration certificate traceable to National Standards and Instructions Manual on the Use and Care of Guage Blocks.

Standard Metric Guage Block Set :

Types of set	M 8
Sizes in mm	125,150,175,200,250,300,400&500
Qty.	8 nos.

Model

Length Bars

• Offered from range 100 to 500 mm in 'Reference Grade';'Calibration Grade','Inspection Grade',and Workshop Grade' as per IS: 7014 standard.

• Also offered as per ISO :3650/ DIN 861 standard in Grade K,Grade 0,Grade1&Grade2.

• Manufactuured from the same special alloy steel used for Guage Blocks,Ofeered in 22mmdia.from range 25 to 500 mm in steps of 25mm.

• 'Calibration Grade' Inspection Grade' and 'Workshop Grade' are provided with internal threaded holes to both the ends for combinations with the help of studs.

• Reference grade length bars are used as a master and with plain ends for highest accuracy.

• Also offered in 12 mm dia from range 25 to 500 mm in steps of 25 mm which can be used as Micrometer Setting Standards.

• Supplied along with calibration certificate traceable to National Standards and Instructions Manual on the use and care of Length Bars.

Length Bars

Request a quote...

Guage Block Accessories

Request a quote...

Model

Guage Block Accessories

• Extended the use of guage Blocks & designed to utilize the accuracy of Guage Blocks in production & Inspection.

• Enable quick & easy assembly of precision Measuring Equipments or Guage as required for most accurate measurement & saves the user from repetitive expenditure on guages.

• Best suitable for : Setting of Internal & External measurement of guages Setting of Bore Guages, Height Marking, Graduation Marking etc.

• Wear parts manufactured in Carbide, supplied in quality wooden casing along with Calibration Certificate traceable to NAtional Standards & Instruction Manual on the Use & Care of Guage Block Accessories.

•Manufactured as per IS:4440 Standard, offers in two types i)7Pcs & ii) 16pcs.

Available Sets Of Guage Block Accessories:

Description	7Pcs	16 Pcs
Base (Steel)	01	01
Tungsten Carbide Scriber	01	01
Tungsten Carbide Tipped Centre Point	-	01
Tungsten Carbide Large Measuring Jaw	02	02
Tungsten Carbide Parallel Measuring Jaw	-	01
Tungsten Carbide '2 mm 'Radius Jaw	-	02
Tungsten Carbide '4 mm 'Radius Jaw	-	02
Tungsten Carbide '5 mm 'Radius Jaw	-	02
Holder (Steel) '0-50 mm '	01	01
Holder (Steel) '50-100 mm '	01	01
Holder (Steel) '100-200 mm '	01	01
Holder (Steel) '200-300 mm '	-	01

Guage Block Accessories

Request a quote...

Model

Guage Block Accessories

• Extended the use of guage Blocks & designed to utilize the accuracy of Guage Blocks in production & Inspection.

• Enable quick & easy assembly of precision Measuring Equipments or Guage as required for most accurate measurement & saves the user from repetitive expenditure on guages.

• Best suitable for :Setting of Internal & External measurement of guages Setting of Bore Guages, Height Marking ,Graduation Marking etc.

• Wear parts manufactured in Carbide, supplied in quality wooden casing along with Calibration Certificate traceable to NAtional Standards & Instruction Manual on the Use & Care of Guage Block Accessories.

• Manufactured as per IS:4440 Standard, offers in two types i)7Pcs & ii) 16pcs.

Available Sets Of Guage Block Accessories:

Description	7Pcs	16 Pcs
Base (Steel)	01	01
Tungsten Carbide Scriber	01	01
Tungsten Carbide Tipped Centre Point	-	01
Tungsten Carbide Large Measuring Jaw	02	02
Tungsten Carbide Parallel Measuring Jaw	-	01
Tungsten Carbide '2 mm 'Radius Jaw	-	02
Tungsten Carbide '4 mm 'Radius Jaw	-	02
Tungsten Carbide '5 mm 'Radius Jaw	-	02
Holder (Steel) '0-50 mm '	01	01
Holder (Steel) '50-100 mm '	01	01
Holder (Steel) '100-200 mm '	01	01
Holder (Steel) '200-300 mm '	-	01

Model	Caliper Checker
• Best suitable for Calibration of Vernier Calipers and Vernier Height Guages of all types (Mechanical/ Dial Digital) up to 1 meter • Available in Tungsten Carbide and Steel. • Comprises of permanently wrunghigh-grade super finished Guage Blocks of specially selected material from Alloy Steel and Tungsten Carbide for greater wear resistence and superior surface finish.

Models In Tungsten Carbide and Steel:

Range	External Measurment	Internal Measurement	Height Measurment	Accuracy ( ± )
300	360	300	360	0.003
600	660	600	660	0.005
1000	1060	1000	1060	0.007

Caliper Checker

Request a quote...

Depth Micro Checker

Request a quote...

Model	Depth Micro Checker
• Best suitable for calibration and zero setting of Depth Micrometer up to 300 mm. • Available in Tugsten Carbide and Steel. • Comprises of permanently wrung high-grade super finished Guage Blocks of specially selected material from Alloy Steel and Tungsten Carbide for greater wear resistence and superior surface finish.

Models InTungsten Carbide and Steel

Range	Measuring steps	Accuracy( ± )
150	0,25....150...step 25	0.003
300	0,25...300 step 25	0.005

Model	Internal Micro Checker
• Best suitable for Calibration and Zero setting of Internal Micrometer uo to 600 mm range. • Available in Tungsten Carbide and Steel. • Comprises of permanently wrung high-grade super finishd Guages Blocks of specially selected material from Alloy Steel and Tungsten Carbide for greater wear resistance and superior surface finish.

Model In Tungsten Carbide and Steel :

Range	Measuring Steps	Accuracy ( ± )
300	0,25....300..step 25	0.003
600	0,25....600..step25	0.005

Internal Micro Checker

Request a quote...

Micrometer Checker

Request a quote...

Model	Micrometer Checker
• Best suitable for quick and reliable calibration of 0-25 mm External Micrometer. • Consist of Guage Blocks fixed in precisely manufactured vertical stand. • The Micrometer Checker is available in Grade 0, Grade 1 and Grade 2.

Available Models:

Types of set	Size
M-10 (Metric)	2.5,5.1,7.7,10.3,12.9,15,17.6,20.2,22.8&25mm
M-8 (Metric)	3.1,6.5,9.7,12.5,15.8,19,21.9&25mm
E-8 (Imperial)	0.13,"0.25",0.5",0.615",0.75",0.87"&1

Model

Dial Guage Comparator Stand

• Manufactures in 3 Types

1. 0-150mm with fine Adjustment Specification:
Mounting Hole : Ø8mm, Ø 28mm & Ø 30mm
Work Table: Ø60mm Steel/Carbide(plain/serrated)

2. 0-200 mm with Micro Fine Adjustment Specification:
Mounted Hole Ø 8mm
Work Table : (a) 60x60x6 mm in Carbide (Plain/Serrated)
(b) 80x80x6 mm in Carbide (Plain/Serrated)

3. 0-300mm with Micro Fine Adjustment Soecification:
Mounted Hole Ø 8mm
Work Table : (a) 60x60x6 mm in Carbide (Plain/Serrated)
(b) 80x80x6 mm in Carbide (Plain/Serrated)

• Also supplied spare comparator base in Carbide/Steel, lapped to the required flatness accuracy in following sizes.

1. Ø60x6mm(Plain/Serrated)

2. Ø80x8mm(Plain/Serrated)

3.Ø60x60x6mm(Plain/Serrated)

Dial Guage Comparator Stand

Request a quote...

Dial Snap Gauges

Request a quote...

Model

Dial Snap Gauges

• Offers High Precision Dial Snap Guage for quick and precise comparative measurments\ of external diameters up to 200 mm range.

• Best suitable for inspection os continuous/Batch production items.

• Setting is done with the help of Guage Block/Cylindrical Setting Masters.

• 3Measuring faces are provided with Tungsten Carbide Material for greater wear resistence

• Parallelism of measuring faces is within 0.003mm upto 200 mm range.

• Any standard Dial UIndicator with Ø8mm holding shank can be fitted easily.

Model

Snap Guage

• Offers selection of Snap Guages from Tungsten Carbide/Steel material from 1-300 mm range as per standard in single ended design.

• Also supplied as per customer requirement for checking of length & Groove Diameter etc.

• Also offered in double ended as per requirement.

• Supplied with proper marking of GO and NOGO sizes.

Snap Guage

Request a quote...

Carbide Plug Guages

Request a quote...

Model

Carbide Plug Guages

• Offers Carbide Plug Guages with GO member in Carbide and NOGO member in steel. NOGO member can be supplied in carbide as per requirement

• Manufactured from special grade of Tungsten Carbide and Alloy Steel for greater wear resistance and surface finish.

• Supplied as per customers requirement for special length.

• Supplied with proper marking of GO and NOGO sizes, NOGO identification.

Available Range and Types :

Range in mm	5-8	8-40	40-60	60-350
Type	Reversible	Taper Shank	Tri Lock	Plate

Model	Ring Guages
• Offered Tungsten Carbide Ring Guages with GO member in Carbide and NOGO member in steel. • NOGO member can be supplied in carbide as per requirement. • Undertakes manufacturing of special length Ring Guages as per customer requirement. • Manufactures iin Carbide for 6-60mm range & in Steel 6-100mm range. •Supplied with proper marking of GO and NOGO sizes,NOGO identification.

Ring Guages

Request a quote...

Width Guage

Request a quote...

Model	Width Guage
• Best suitable for cheking of groove width. • Standard supply is with reversible type design. • Also manufactures as per customers requirements. • Available in Cardbide & Steel Material. • Supplied with proper marking of GO and NOGO sizes, NOGO identification.

Model	Carbide Measuring Pins
• Offers Carbide Pins from0.5-10mmin 'Gr.1'(Mfg. Tol +/-0.001mm)&'Gr.2 '(Mfg. Tol +/-0.002mm) as per IS:11103 standard. • Supplied in set/individual as per customer requirement. • Also available in Steel from range 0.5-20mm.

Carbide Measuring Pins

Request a quote...

KRIS

Precisions Components