QL/QLE    
 
 
 
Standard torque wrench.
  
 
QL    
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±3%
  
 
Model Torque Range HAND FORCE AT MAX. TORQUE EFFECTIVE LENGTH OVERALL LENGTH SQUARE DRIVE WEIGHT APPROX.
S.I. METRIC AMERICAN MIN.~MAX. GRADUATION
S.I. METRIC AMERICAN S.I. METRIC AMERICAN N lb mm in. mm in. mm in. kg lb.
QL1.5N 15QL 15QL-A N.m
0.5~1.5		 kgf.cm
5~15		 in.lbs
4~10		 N.m
0.025		 kgf.cm
0.25		 in.lbs
0.2		 12 2 31/32 125 5 1/16 175 6 57/64 6.35 1/4 0.12 9/32
QL3N 30QL 30QL-A 1~3 10~30 10~30 0.05 0.5 0.5 24 5 59/64
QL6N 60QL QL50I-2A 2~6 20~60 20~50 0.1 1 1 48 9 15/16
QL12N 120QL QL100I-2A 4~12 40~120 40~100 0.2 2 2 92 19 33/64 130 5 1/8 185 7 19/64 0.18 13/32
- - QL200I-2A - - 50~200 - - 2.5 - 32 21/32 - 6 1/8 - 8 43/64 - - 9/16
QL25N 225QL3 QL200I-3A 5~25 50~250 50~200 0.25 2.5 161 155 220 9.53 3/8 0.25
QL50N 450QL3 QL400I-3A 10~50 100~500 100~400 0.5 5 5 278 56 25/64 180 7 3/32 260 10 1/4 0.45 1
- - QL750I-3A - - 150~750 - - 10 - 73 11/64 - 10 1/4 - 13 25/64 - - 1 1/2
QL75F-3A ft.lbs
15~75		 ft.lbs
1		 87 13/16
QL100N 900QL3 - 20~100 200~1000 - 1 10 - 385 - 260 - 340 - 12.7 1/2 0.69 -
QL140N 1400QL3 QL100F-4A 30~140 300~1400 30~100 1 10 1 440 95 49/64 318 12 17/32 400 15 3/4 0.79 1 3/4
QL200N 1800QL3 QL150F-4A 40~200 400~2000 30~150 2 20 2 500 114 19/64 400 15 3/4 495 19 1/2 1.4 3 1/8
QL280N 2800QL3 - 40~280 kgf.m
4~28		 - kgf.m
0.2		 - 467 - 600 - 695 - 19.05 3/4 1.9 -
QL420N 4200QL2 QL300F-6A 60~420 6~42 60~300 3 467 101 19/32 900 35 7/16 975 38 3/8 3.2 7 1/16
QLE550N 5500QLE QL400F-6A 100~550 10~55 100~400 5 0.5 5 500 111 17/32 1100 43 5/16 1190 47 1/8 5.1 11 15/32
QLE750N 7500QLE QL600F-6A 100~750 10~75 100~600 600 147 3/8 1250 49 7/32 1365 54 7.1 15 11/16
QLE1000N 10000QLE QL700F-8A 100~1000 10~100 100~700 714 153 11/32 1400 55 1/8 1535 60 1/2 25.4 1 9.5 20 15/16
QLE1400N 14000QLE QL1000F-8A 200~1400 20~140 150~1000 10 1 10 848 185 27/32 1650 64 31/32 1794 71 13.1 27 7/8
QLE2100N 21000QLE QL1500F-8A 500~2100 50~210 600~1500 20 2 20 1200 262 27/32 1750 68 29/32 1950 76 3/4 20 44 1/8
 
  Notes  
  Note 1 : For QLE550N-2100N, adjusting tool is supplied as standard accessory.
Note 2 : QL1.5N-12N, 420N, QLE550N-2100N are with knurled handle.
Note 3 : Not for inspection purpose.
Note 4: For QL with limit switch.		  
 
 
 
.